TPS3306-18DRG4 Datasheet| | | | | | | | | | ICfIB= 20 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2SI | }9E | 16/1 | 1SDIE | 148 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For PNP, minus aign is omitted. | | | | | | | | | | | | | | | | | |
TPS3306-18DRG4 Price| Parameter | Rating | | VDD to GND | -0.3V to +7V | | Analog Input Voltage to GND | -0.3 V to VDD + 0.3 V | | Referencelnput Voltage to GND | -0.3 V to VDD + 0.3 V | | Total AIN/REFIN Current (Indefinite) | 30 mA | | Digitallnput Voltage to GND | -0.3 V to VDD + 0.3 V | | Digital Output Voltage to GND | -0.3 V to VDD + 0.3 V | | Operating Temperature Range | -400C to +1 050C | | Storage Temperature Range | -650C to +1 500C | | Maximum Junction Temperature | 1500C | | MSOP | | eJA Thermallmpedance | 2060C/W | | eJc Thermallmpedance | 440C/W | | Lead Tem perature, Soldering (10 sec) | 3000C | | IR Reflow, Peak Temperature | 2200C | | |
TPS3306-18DRG4 on stock A load fault applied to Voi will cause this output voltage to drop. A drop in Voi (to less than 10V) will also cause outputs V02 and V03 to simultaneously turn off. Load faults applied to either V02 0r V03 will cause both these outputs to drop, but in this case Voi will be unaffected. | PARAMETER | MIN | MAX | UNITS | | fclock | Clock frequency | | 300 | MHz | | tW | Pulse duration. CLK,CLK high or low | 1 | | ns | | tACT | Differential active time4 | | 1 0 | ns | | oINACT | Dierential inactive time5 | | 1 5 | ns | | | | DCS before CLKt , CLKI , CSR high | 0.7 | | ns | | ts | Setup time | DCS before CLKt , CLKL , CSRlow | 0.5 | | ns | | | | CSR, ODT, CKE, and Data before CLK t , CLK L | 0.5 | | ns | | tH | Hold time | DCS, CSR, ODT, CKE, Data before CLK t, CLK ; | 0.5 | | ns | | | | | | |
|
