| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| TPA6211A | TI | MSOP8 | 06+ | New original | 10000 |
|
|
TPA6211A Datasheet Note 7: tPO and CtPO cannot be measured in automatic handling equipment with low values of overdrive. The LT1671 is 100% tested with a lOOmV step and 20mV overdrive. Correlation tests have shown that tPD and CtPO limits can be guaranteed with this test, if additional DC tests are performed to guarantee that all internal bias conditions are correct. Propagation delay (tPD) iS measured with the overdrive added to the actual Vos. Differential propagation delay is defined as: CtPD = tPDLH - tPDHL Note 8: Latch propagation delay (tLPD) iS the delay time for the output to respond when the LATCH pin is deasserted. Latch setup time (tsu) is the interval in which the input signal must remain stable prior to asserting the latch signal. Latch hold time (tH) iS the interval after the latch is asserted in which the input signal must remain stable. TPA6211A Price
TPA6211A on stock ON Semiconductor and ;J are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical iinplant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
