TP3098-BFT98 TP3098-BFT98 TP3098BFT98，there are the best TP3098-BFT98 TP3098-BFT98 TP3098BFT98 suppiers all over the world here.These are the list and detailed contact method of TP3098-BFT98 TP3098-BFT98 TP3098BFT98 suppliers all over the world as follows.You can buy or get informations of TP3098-BFT98 TP3098-BFT98 TP3098BFT98 through email , message or tel.

suppliers of TP3098-BFT98 TP3098-BFT98 TP3098BFT98 and PDF data of TP3098-BFT98 TP3098-BFT98 TP3098BFT98

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

TP3098-BFT98 TP3098-BFT98 TP3098BFT98 Datasheet

j	VALID		j
	tAA-		- tOH -
××××××××)		VALID		<××

TP3098-BFT98 TP3098-BFT98 TP3098BFT98 Price

Copyright@ 2002 Microsemi 11-05-2003 REV C Page 1 Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
TP3098-BFT98 TP3098-BFT98 TP3098BFT98 on stock

The same applies to the heat dissipator in tha device mounting area. If copper heatsink is not used, a copper head spreader is strongl-/ recommended between the de- vice mounting surfaces and the main heatsink. It should be at teast ll4" triick and extend at least one inch from the flange edges. A thin layer of thermal compound in all interfaces is, of course, essential. The recommended torque on the 4-40 mounting screws should be in the area of 4-5 lbs.-inch, and spring type lock washers along with flat washers are recommended.

PIN	NAME	TYPE	DESCRIPTION
1	DIN	Digital input	Serial audio data input
2	BCKIN	Digital input	Bit clock input
3	LRCIN	Digital input	Sample rate clock input
4	MCLK	Digital input	System master clock input
5	VOUTR	Analogue output	Right channel DAC output
6	GND	Supply	Analogue ground supply
7	VDD	Supply	Positive supply
8	VOUTL	Analogue output	Left channel DAC output

Suppliers Datasheet
		Exact Matc