| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| TP0101TRT1 | N/A | 58 |
|
|
TP0101TRT1 Datasheet MODEL DBDMOD D (IS = 7.97e-17 RS = 1.82 TRSl = 3.91e-3 TRS2 = 1.24e-5 CJO = 3.OOe-10 TT = 1.83e-7) MODEL DBKMOD D (RS = 3150 TRSl =0 TRS2 = O) MODEL DESDIMOD D (BV = 13.54 TBVl = O TBV2 = O RS = 45.5 TRSl = O TRS2 = O) MODEL DESD2MOD D (BV = 11.46 TBVl = -7.576e-4 TBV2 = -3.Oe-6 RS = O TRSl = O TRS2 = O) MODEL DPLCAPMOD D (CJO = 74.2e-12 IS =1e-30 N =10) MODEL MOSMOD NMOS (VTO = 1.67 KP = 3.40 IS = 1e-30 N = 10 TOX = 1 L=lu W=lu) MODEL QMOD NPN (BF =5) MODEL RBKMOD RES (TCl = 4e-4 TC2 = 1.13e-8) MODEL RDSMOD RES (TCl = 6.80e-3 TC2 = 6.5e-6) MODEL RSMOD RES (TCl = 2.95e-3 TC2 = -1e-6) MODEL RVTOMOD RES (TCl = -2.22e-3 TC2 = -1.95e-6) MODEL SIAMOD VSWITCH (RON = 1e-5 ROFF = 0.1 VON = -3 VOFF = -1) MODEL SIBMOD VSWITCH (RON = 1e-5 ROFF = 0.1 VON = -1 VOFF = -3) MODEL S2AMOD VSWITCH (RON = 1e-5 ROFF = 0.1 VON = -2.85 VOFF = 2.15) MODEL S2BMOD VSWITCH (RON = 1e-5 ROFF = 0.1 VON = 2.15 VOFF = -2.85) TP0101TRT1 Price
TP0101TRT1 on stock Basic concept of Multi-Plane Block Erase operation is identical to that of Multi-Plane Page Program. Up to four blocks, one from each plane can be simultaneously erased. Standard Block Erase command sequences (Block Erase Setup command followed by three address cycles) may be repeated up to four times for erasing up to four blocks. Only one block should be selected from each plane. The Erase Confirm command initiates the actual erasing process. The completion is detected by analyzing R/B pin or Ready/Busy status (110 6). Upon the erase completion, pass/fail status of each block is examined by reading extended pass/fail status(l/0 1 through 110 4).
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
