| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| TOL75-05 | TRACO | 2009+ROHS | 400 |
|
|||
| TOL75-05 | TRACO | 2008+ | TRACO A full range | 1000 |
|
|
TOL75-05 Datasheet Although the receiver features a robust design, care should be used during handling. The optical connector should be kept free from dust, and the process cap should be kept in place as a dust cover when the device is not con- nected to a cable. If contamination is present on the optical connector, the use of canned air with an extension tube should remove any debris. Other cleaning procedures are identified in the technical note,Cleaning Fiber-Optic Assemblies (TN95-010LWP). TOL75-05 Price These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. TOL75-05 on stock
8. tWCS, tRWD, tCWD and tAWD are nan restrictive operating parameters. They are included in the data sheet as electrical characteristics only. If twcs}twcs(min) the cycle is an early write cycle and the data out pin will remain high impedance for the duration of the cycle. 9. Either tRCH or tRRH must be satisfied for a read cycle. 10. These parameters are referenced to the ~AS leading edge in early write cycles and to the W leading edge in read-write cycles. 11. Operation within the tRAO(max) limit insures that tRAC{max) can be met. tRAD(max) is specified as a reference point only. If tRAD iS greater than the specified tRAD(max) limit, then access time is con traIled by tAA. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
