TOF 100-05S，there are the best TOF 100-05S suppiers all over the world here.These are the list and detailed contact method of TOF 100-05S suppliers all over the world as follows.You can buy or get informations of TOF 100-05S through email , message or tel.

suppliers of TOF 100-05S and PDF data of TOF 100-05S

Part Numbert	Mfg	Packt	D/C	Descriptiont	Qty	Company/Contact
TOF 100-05S	TRACO POWER		07+	Factory stock, deliv	500	shenzhen cenyion technology co.. Contact:lin Tel:86-755-83039750 Fax:86-755-83038946 Email: sales@cenyion.com
TOF 100-05S	TRACO		06＋	Available,Franchised	100	GuangZhou BinBin Technology De.. Contact:lin Tel:86-20-31795262 Fax: Email: gzbbdz@qq.com
TOF 100-05S	TRACO	Available,	06＋		100	Shenzhen Chitron Electronics C.. Contact:yao Tel:86-755-82116111 Fax: Email: stocksales@chitron.com
TOF 100-05S	TRACO		06＋		100	HK CHISHING ELECTRONICS CO., Contact:maggielee Tel:86-755-61303995 Fax:86-755-61306028 Email: maggielee@zcicgs.com.cn

TOF 100-05S Datasheet

Parameter	Symbol	Min	Max	Unit
Supply Voltage	Vcc	4 5	5 5	V
Input High Voltage	VIH	2 2	Vcc+ 0.3	V
Input Low Voltage	VIL	-0.3	+0.8	V
Operating Temp. (Mil.)	TA	-55	+125	1c

TOF 100-05S Price

Most applications are dominated by two transmission frequencies: fSend = 315 MHz is mainly used in USA, fSend = 433.92 MHz in Europe. In order to ease the usage of all TClk dependent parameters, the electrical characteristics display three conditions for each parameter.
TOF 100-05S on stock

					Outputs
Mode/Pin	CE	OE	Ai	BYTENpp	00-07	08-014	01s/A-1
Read Word-wide	VIL	VIL	X(1)	VIH	DOUT	DOUT	DOUT
Read Byte-wide Upper	VIL	VIL	X(1)	VIL	DOUT	High Z	VIH
Read Byte-wide Lower	VIL	VIL	X(1)	VIL	DOUT	High Z	VIL
Output Disable	X(1)	VIH	X(1)	x		High Z
Standby	VIH	x(l)	X(1)	X(6)		High Z
Rapid Program(3)	VIL	VIH	Ai	VPP		DIN
PGM Verify	x	VIL	Ai	VPP		DOUT
PGM Inhibit	VIH	VIH	X(1)	VPP		High Z
Product ldentification(5)	VIL	VIL	A9 = VH(4) AO = VIH or VIL A1 - A18 = VIL	VIH	Identification Code

Parameter	45L /150K	Units	Conditions
IF(AV) Max. average forward current	150	A	1800 conduction, half sine wave
@ Case temperature	150	ac	1800 conduction, half sine wave
IF(RMS) Max. RMS forward current	235	A	DC @ 1420C case temperature
IFSM Max. peak, one-cycle forward,	3570	A	t= 10ms	No voltage
non-repetitive surge current	3740		t= 8.3ms	reapplied
	3000		t= 10ms	100% VRRM
	3140		t= 8.3ms	reapplied	Sinusoidal half wave,
12t Maximum l2t for fusing	64		t= 10ms	No voltage	Initial Tj = Tj max.
	58		t= 8.3ms	reapplied
	45	KA2S	t= 10ms	100% VRRM
	41	KA2S	t= 8.3ms	reapplied
12 Sjt Maximum l2 fb for fusing	640	KA2	t= 0.1 to'	Oms, no voltage reapplied
VF(TO), Low level value of threshold voltage	0 67	V	(16.7% x 7t x IF(AV) < I < #: X IF(AV' Tj = Tj max.
VF(T0)2 High level value of threshold voltage	0 83	V	(l > x *x IF(AV'TJ = Tj max.
rfi Low level value of forward slope resistance	1 42	ml	(16.7% x # x IF(AV) < I < #: X IF(AV' Tj = Tj max.
rf2 High level value of forward slope resistance	0.91	ml	(l > X # x IF(AV,Tj = Tj max.
VFM Max. forward voltage drop	1 33	V	lpk= 471A, Tj = 250C, tp = 10ms sinusoidal wave

Suppliers Datasheet
		Exact Matc