| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| TO-126 | FA82537EP | LM4882MMX | GF741553GWE | 1000 |
|
 |
|
| TO-126 | . | . | . | . | 100000 |
|
|
| TO-126 | . | . | 200000 |
|
|
TO-126 Datasheet 7. Dimension H does not include Dambar protrusion or intrusion. The Dambar protrusion(s) shall not cause the H dimension to be greater than 0.037 (0.940). The Dambar intrusion(s) shall not cause the H dimension to be smaller than 0.025 (0.635). TO-126 Price Load Data into Buffer command is a two-cycle command. Two sequential designated command activates this operation. Sequentially writing OOEOh and OOOOh to the boot partition [OOOOh~OIFFh, 8000h~800Fh] will load one page to DataRAMO. This operation refers to FBA and FPA. FSA, BSA, and BSC are not considered. At the end of this operation, FPA will be automatically increased by l. So continuous issue of this command will sequentially load data in next page to DataRAMO. This page address increment is restricted within a block. The default value of FBA and FPA is 0. Therefore, initial issue of this command after power on will load the first page of memory, which is usually boot code. TO-126 on stock The horizontal sync HSYNC is a monostable output derived from the leading edge of the composite sync. The pulse width is about 5 Us. Also, during the Field blanking sequence, the additional half-line pulses are removed by a timing circuit with a pulse interval discrimination function controlled by RSET.
|
