| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
STW4141 Datasheet The BL15- 1212 is a LED of 650nm wavelength using four elements (AIG aInP). Our original LED pro c e s sing technology made it possible to increase the electric current density at the emission point. The luminous strength of single light source per unit surface is now more than ten times higher than befon2. STW4141 Price DVB-ASI operation is enabled by asserting DVB_EN LOW. This signal is latched by the rising edge of the CKW clock. When the CY7C9235 is placed in DVB mode, the SMPTE and NRZI encoders are bypassed, and the data latched into the input register is routed directly to the output register. STW4141 on stock The MAX5104's digital inputs are double buffered, which allows any of the following: loading the input reg- ister(s) without updating the DAC register(s), updating the DAC register(s) from the input register(s), or updating the input and DAC registers concurrently. The address and control bits allow the DACs to act independently. Send the 16-bit data as one 16-bit word (QSPI) or two 8-bit packets (SPI, MICROWIRE), with CS low during this period. The address and control bits determine which register will be updated, and the state of the reg- isters when exiting power-down. The 3-bit address/con- trol determines the following: . Registers to be updated . Clock edge on which data is to be clocked out via the serial-data output (DOUT) . State of the user-programmable logic output . Configuration of the device after power-down
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
