| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
STV9380H Datasheet HARDWARE PROTECT The STK20C04 0ffers two levels of protection to sup- press inadvertent STORE cycles. If the control signals (E, G,W, and NE) remain in the STORE condition at the end of a STORE cycle, a second STORE cycle will not be started. The STORE (or RECALL) will be initiated only aftera transition on any one ofthese signals to the required state. In addition to multi-trigger protection, the STK20C04 0ffers hardware protection through Vcc Sense. A STORE cycle will not be initiated, and one in progress will discontinue ifVcc goes below 3.8V. 3.8V is a typical, characterized value. STV9380H Price
STV9380H on stock 7. Pop Noise Although the LA47536 includes an pop noise prevention circuit, pop noise can be reduced even further by using the muting function as well. . Activate the muting function at the same time as power is applied. Then, after the output DC potential has stabilized, turn off the muting function. . When turning the amplifier off, first turn on the muting function and then turn off the power supply. These two methods are effective at minimizing pop noise. NOTES (READ CYCLE) 1. tHZ and tOHZ are defined as the time at which the outputs achieve the open circuit conditions and are not referenced to output voltage levels. 2. At any given temperature and voltage condition, tHz(Max.) is less than tLz(Min.) both for a given device and from device to device interconnection. |
