STR4211H，there are the best STR4211H suppiers all over the world here.These are the list and detailed contact method of STR4211H suppliers all over the world as follows.You can buy or get informations of STR4211H through email , message or tel.

suppliers of STR4211H and PDF data of STR4211H

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

STR4211H Datasheet

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.
STR4211H Price

Pin No.	Symbol	Description
1	GND	Ground.
2	VDD	The +5V power supply input.
3	RS	RESET/STROBE (Bidirectional). The open drain goes active if: 1. VDD falls below 4.5V nominal. 2. If pulled low by an external electronic signal or switch closure. 3. If the watchdog is not strobed within the minimum watchdog timeout period. 4. During power-up and power-down. In the input mode, RS connects to a voltage level shift network (typically a resistor divider
		to VDD.) The watchdog timer is reset when processor causes a voltage level " Vs rL to be
		applied to RS.
4	VDD	The +5V power supply input. (SOT-223 0nly).

STR4211H on stock

The various error terms in the log amplifier, the 8048, are referred la the output (RTO) of the device. The error terms in the antilog amplifier, the 8049, are referred lo the Input (RTI) of the device. The errors are expressed in this way because in the majority of systems a number of log amps interface with an antilog amp, as shown in Fig. 5.

REMOTE PREAMPLIFIER OPTIONS OPTION 03 REMOTE PREAMPLIFIER Add 5 pin XLR connector to rear panel to supply +28 volts +28 VOLT POWER and sienal connecUons to remote oreamDlifier

OPTION 09 REMOTE PREAMPLIFIER Add 5 pin XLR connector to rear panel to supply +15 volts t15VOLT POWER and signal connections to remote preamplifier

Suppliers Datasheet
		Exact Matc