ADMap-5  > STR S6709

suppliers of STR S6709 and PDF data of STR S6709

Part Numbert Mfg Packt D/C Descriptiont Qty Company/Contact  

STR S6709 Datasheet

PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Operating Voltage Range, Vcc, VBArr (Note 2) 0 5.5 V
As applicable; CE IN = OV, MAX81 C 11 45
Supply Current (excluding IOUT) ISUPPLY WDI and MR unconnected MAX81 E 11 60 UA
TA= +250C 0.05 1.0
Supply Current in Battery- Backup Mode (excluding IOUT) Vcc= OV TA = TMIN to TMAX 5.0 IJA
TA= +250C -0.10 0.02
BATT Standby Current (Note 3) 5.5V > Vcc > (VBATT + 0.2V) TA = TMIN to TMAX -1.00 0.02 UA
BATT Leakage Current, Freshness Seal Enabled Vcc = OV, VOUT = OV 1 UA
IOUT= 5mA Vcc - Vcc - 0.05 0.025 V
VOUT Output IOUT= 50mA Vcc - Vcc - 0.5 0.25
Vcc to OUT On-Resistance 5 10
BATT to OUT On-Resistance 100
VOUT in Battery-Backup Mode IOUT = 250pA, Vcc VBAl-T - 0.2V) VBATT - VBATT - 0.1 0.02 V
Battery Switch Threshold Vcc< VRST Power-up 20 mV
(Vcc - VBATT) Power-down -20
Battery Switchover Hysteresis 40 mV


STR S6709 Price
It will be necessary to provide a suitable heatsink in order to maintain the module flange temperature at or below to maximum case operating temperature. In a case where the module output power limited to +42 dBm CW and designing for the worst case efficiency of 32%, the power dissipated by the module will be 33.6 Watts. The heatsink must be designed such that the thermal rise will be less than the
STR S6709 on stock

Current Rating VCES
Type Amperes VoltsfX 50)
CM 300 12


(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technicalinformation described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan.