| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| STP2210 | ADAPTEC | QFP | 260 |
|
![]() |
||
| STP2210 | SUN | QFP | 08+09+ | stock | 980 |
|
|
| STP2210 | KONG | 28 |
|
||||
| STP2210 |
|
||||||
| STP2210 | 02+ | QFP | 16 |
|
![]()
|
||
| STP2210 | SUN | . | 02+ | 16 |
|
![]()
|
|
| STP2210 | SUN | . | 02+ | 29 |
|
![]()
|
|
| STP2210 | SUN | QFP | 07+ | 进口原装货 | 500 |
|
|
| STP2210 | N/A | . | 08+ | We Olny sale “QFP、BG | 2000 |
|
![]()
|
| STP2210 | ADAPTEC | QFP | 08/09+ | 260 |
|
||
| STP2210 | 02+ | QFP | 16 |
|
![]()
|
||
| STP2210 | 02+ | QFP | 16 |
|
|||
| STP2210 | ADAPTEC | 260 |
|
||||
| STP2210 | SUN | 1650 |
|
STP2210 Datasheet
STP2210 Price DESCRIPTION The 2294760 Power Hybrid contains four N-Channel Enhancement mode high voltage power MOSFETS. Each is coupled with a blocking Schottky diode on the drain and a by-pass ultrafast recovery diode from the source to eliminate momentary shoot-through conditions caused by induced slow MOSFET recovery. Each MOSFET gate is also connected to back-to-back zeners for gate overvoltage protection. STP2210 on stock The upper ESD diodes for the R, G and B channels are connected to a separate supply rail (VRGB) to facilitate interfacing to graphics controller ICs with low voltage supplies. The remaining channels are connected to the main 5V rail (Vcc). The lower diodes for the R, G and B channels are also connected to a dedicated ground pin (GNDA) to minimize crosstalk due to common ground impedance. The absolute maximum ratings are values which must not individually be exceeded, and furthermore no two of which may be realized at the same time. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. This value is limited t0 5.5 V maximum. The maximum package power dissipation was calculated using a junction temperature of 1500C |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||