SOMC1603100RGEA Datasheet The LA4600 is an audio power amplifier which requires minimum count of external parts by incorporating BS capacitor, NF capacitor; and oscillation prevention CR components into the IC circuitry. SOMC1603100RGEA on stock 1. Adjust DIMM to the socket key direction. 2. Insert the DIMM along both socket sides and straight in the vertical direction to the mounting board. At this time, anti- vibration mechanism (protrusion) causes slight resistance to occur, but insert the DIMM until to hit the bottom. However, avoid slant and flap insertion, or slant engagement or half-insertion. 3. When the DIMM is inserted, it is engaged with a click tone. [Procedures for Board Extraction] 1. Press the ejector in the vertical direction. 2. Pick up the DIMM with fingers, which floats slightly. Precautions | CHARACTERISTIC | SYMBOL | TEST CONDITION | MIN | TYP | MAX | UNIT | | Collector Cut-off Current | ICBO | VCB=20V, IE=O | | | 0.1 | A | | Emitter Cut-off Current | IEBO | VEB =2V, IC = 0 | | | 1.0 | pA | | DC Current Gain | hFE (Note) | VCE =12V, IC = 2mA | 40 | | 240 | | | Collector-Emitter Saturation Voltage | VCE (sat) | IC =10mA, IB =1mA | | | 0.4 | V | | Base-Emitter Voltage | VBE (sat) | IC =10mA, IB = ImA | | | 1.0 | V | | Transition Frequency | fT | VCE =10V, IC = 2mA | 80 | 120 | | MHz | | Reverse Transfer Capacitance | Cre | VCB=10V, IE=O, f=lMHz | | 2.2 | 3.0 | pF | | Collector-Base Time Constant | Ccrbb' | VCE = 10V, IE = - 1mA, f= 30MHz | | 30 | 50 | ps | | Noise Figure | NF | VCE = 10V, IE = - 1mA, f=lMHz, Rg= 50fl | | 2.0 | 3.5 | dB | | | | | | | |
| ABSOLUTE MAXIMUM RATINGS (TA = 25aC unless otherwise specified) | | Parameter | Symbol | Rating | Unit | | Operating Temperature | 1 0PR | -40 to +100 | aC | | Storage Temperature | TSTG | -40 to +100 | aC | | Lead Soldering Time | TSOL | 260 for 5 sec | aC | | Continuous Forward Current | IF | 30 | mA | | Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) | IF | 100 | mA | | Reverse Voltage (IR = 10 pA) | VR | 5 | V | | Power Dissipation | PD | 120 | mW | | | | |
|
