SKKH132-20E Datasheet| Symbol | Parameter | Test Conditions | Max | Units | | VCES | Collector-emitter voltage | VGE= OV | 1700 | V | | VGES | Gate-emitter voltage | | +20 | V | | le | Continuous collector current | T = 75C | 1200 | A | | IC(PK, | Peak collector current | 1ms, Tcase = 1050C | 2400 | A | | D | Max. transistor power dissipation | Tcase = 250C. T, = 1500C case ' | 10.4 | kW | | 12f | Diode l2t value | VR = 0. tp = 10ms. Tv, = 1250C vJ | 480 | kA2S | | Vl | Isolation voltage - per module | Commoned terminals to base plate. AC RMS, 1 min, 50Hz | 4000 | V | | QPD | Partial discharge - per module | IEC1287. V, = 1500V, V2 = 1100V, 50Hz RMS | 10 | pC | | | | | |
SKKH132-20E Price Several register bits (Bit o to Bit 145) are used to control the circuit's operation and to adapt certain circuit parameters to the specific application. The control bits are orga- nized in four 8-bit, four 16-bit and three 24-bit registers that can be programmed by the 3-wire bus protocol. The bus protocol and the bit-to-register mapping is described in the section "3-wire Bus Description" on page 9. The meaning of the control bits is mentioned in the following sections. SKKH132-20E on stock| lTYPE | VDSS | RDS(on) | -D l | | I STP55NF03L | 30 V | <0.013 l | 55 A l | | TYPICAL RDS | 'on)=0.01 l | | | | |
| rype number | Package | | jTemperature range IName IDescription Version I | | |
|
