| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
SKB25-16E Datasheet
SKB25-16E Price The capacitor Cl is used to compensate for phase shift between the voltage sense inputs and the current sense inputs of the device, in cases where CTs with phase errors are used. The phase shift caused by the CT may be corrected by inserting a capacitor in the voltage divider circuit. To compensate for a phase shift of 0.18 degrees the capacitor value is calculated as follows: SKB25-16E on stock The lC can be switched into a low current standby mode with the standby bit; the bus is then still active. The standby current can be reduced by deactivating the bus interface (pin BUSENABLE LOW). If the bus interface is deactivated (pin BUSENABLE LOW) without the standby mode being programmed, the lC maintains normal operation, but is isolated from the bus lines.
|
