| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
SK4-1E155M-RB Datasheet
SK4-1E155M-RB Price The fixed interpolation mode is used when the user knows what the desired output rate should be relative to the input rate. For example, a user may wish to use this mode when he is using the resampler to baud synchronize a modem signal. In this case the user has an external baud rate detection circuit which tells the user how to adjust the interpolation ratio. SK4-1E155M-RB on stock If any cell voltage drops below the undervoltage thresh- old, the MAX1894/MAX1924 disconnect the pack from the load and power down to prevent deep discharge of the pack. The MAX1894/MAX1924 0ffer a trickle-charge feature, which provides a low-current path to safely charge a deeply discharged pack. The MAX1894/ MAX1924 also have two logic-level inputs, which can be used by a microcontroller to disable the protection MOSFETs and to put the device in shutdown. The MAX1894/MAX1924 have low quiescent current (30UA typ) and ultra-low shutdown current (0.8UA typ) to pre- vent deep-cell discharge. I No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. |
