| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
SK250M0010B5S-1015 Datasheet
SK250M0010B5S-1015 Price SeriaIClock (SCL) The SCL pin connects directly to the SCL of an external EEPROM. The SCL output is used to strobe data at a rate of 50kHz out of the EEPROM. An external pull up resistor is not needed. The SCL output uses a soft driver and may be overdriven by the calibration equipment. SK250M0010B5S-1015 on stock o o o o o o o o o o o o o o o o o o a , c o r . ( D L O . r m 2 r ( M ) u o ! } P d ! s s ! 0 J a M O d l q o J ( 0 . ) e J n ~ a d L u a j a s P O a l q P M O l l y Oscillator. An internal oscillator operates with a period of l.67 seconds during no- smoke conditions. Every l.67 seconds, internal power is applied to the entire circuit and a check is made for smoke. Every 24 clock cycles (40 seconds), the LED is pulsed and a check is made for low battery by comparing VDD to an internal reference. Because very-low currents are used in the device, the oscillator capacitor at pin 12 should be a low-leakage type (PTFE, polysty- rene, or polypropylene). |
