SK13-T3，there are the best SK13-T3 suppiers all over the world here.These are the list and detailed contact method of SK13-T3 suppliers all over the world as follows.You can buy or get informations of SK13-T3 through email , message or tel.

suppliers of SK13-T3 and PDF data of SK13-T3

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

SK13-T3 Datasheet

TA= +85C
	=	j
		jj	T=4	=
	TA:	+250C	T=4

SK13-T3 Price

ABSOLUTE MAXNMUM RATINGS (TA = 250C UNLESS OTHERWNSE NOTED)
Parameter		Symbol	Limit	Unit
Drain-Source Voltage		VDS	60	V
Gate-Source Voltage		VGS	20	V
	Tc= 25C		75	A
Continuous Drain Current (Tj = 1750C)	Tc= 1000C	ID	53
Pulsed Drain Current		IDM	180
Avalanche Current		IAR	60
Repetitive Avalanche Energya	L= 0.1 mH	EAR	180	mJ
	Tc = 250C (T0-220AB and T0-263)	PD	142b
Power Dissipation	TA = 250C (T0-263)e	PD	3 750	W
Operating Junction and Storage Temperature Range		Tj, Tstg	-55 t0 175	oc

SK13-T3 on stock

a) Pull-Up Resistors: Any internal resistors pull-ups on the SDATA and SCLOCK inputs must be stated in the individual datasheet. The use of internal pull-ups on these pins of below l OOK is discouraged. Assume that the board designer will use a single external pull-up resistor for each line and that these values are in the 5 - 6K Ohm range. Assume one I2C device per DIMM (serial presence detect), one I2C controller, one clock driver plus one/two more I2C devices on the platform for capacitive loading purposes.

a common mode voltagethatis equalto one-half ofthe total supply voltage. Figure 5 illustrates the THD versus output common mode voltage for a 0.5Vp_p/2.OVp_p differential input/output voltage and a common mode input voltage that is equal to one-half the total supply voltage.

Suppliers Datasheet
		Exact Matc