| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
SK016M0470B5S-1012 Datasheet AMD's products are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of AMD's product could create a situation where personal injury, death, or severe property or environmental damage may occur. AMD reserves the right to discontinue or make changes to its products at any time without notice. SK016M0470B5S-1012 Price The same circuit also provides a power-down sequence. Power down is the reverse of power up, and is accom- plished by lowering the track control voltage back to zero volts. The important constraint is that a valid input voltage must be maintained until the power down is complete. It also requires that Qi be turned off relatively slowly. This is so that the Track control voltage does not fall faster than Auto-Track's slew rate capability, which is l V/ms. The components Ri and Ci in Figure 3-5 limit the rate at which Qi can pull down the Track control voltage. The values of 100 k-ohm and 0.1 pF correlate to a decay rate of about 0.17 V/ms. SK016M0470B5S-1012 on stock 1500 Watts of Peak Pulse Power Dissipation at 25 0C** tclamping (0 Volts to BV Min.): unidirectional < lxl0-12 seconds; bidirectional <5xl0-9 seconds; Operating and Storage Temperature: -65 0C to +175 0C Forward Surge Rating: 200 Amps, 1/120 second at 25 0C Steady State Power Dissipation is heat sink dependent.
|
