RS20H12AC002 Datasheet (6) Static Electricity . Static electricity or surge voltage damages the LEDs. It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. . All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts The LEDs. When inspecting the final products in which LEDs were assembled,it is recommended to check whether the assembled LEDs are damaged by static electricity or not. It is easy to find static- damaged LEDs by a light-on test or a VF test at a lower current(below ImA is recommended). . Damaged LEDs will show some unusual characteristics such as the leak current remarkably increases, the forward voltage becomes lower, or the LEDs do not light at the low current. Criteria : (VF > 2.OV at IF=0.5mA) RS20H12AC002 Price| Symbol | Parameter | Test Conditions | Min | Typ | Max | Unit | | VGS(th) | Gate Threshold Voltage | VDS = VGS ID = 250 ccA | 3 | 4 | 5 | V | | RDS(on) | Static Drain-source On Resistance | VGS = 10V ID = 8 A | | 0.22 | 0.28 | l | | ID(on) | On State Drain Current | VDS > ID(on) X RDS(on)max VGS = 10 V | 16 | | | A | | | | | | | |
RS20H12AC002 on stock| | | | -125 | -100 | | | PARAM. | | DESCRIPTION | MIN | MAX | MIN | MAX | UNITS | | Outputs | | tob | 49 | Output Buffer Delay | | 1.3 | | 2.0 | ns | | tsl | 50 | Output Buffer Delay, Slew Limited Adder | | 9.9 | | 10.0 | ns | | toen | 51 | 1/0 Cell OE to Output Enabled | | 4.3 | | 5.1 | ns | | todis | 52 | I/O Cell OE to Output Disabled | | 4.3 | | 5.1 | ns | | tgoe | 53 | Global OE | | 2.7 | | 3.9 | ns | | Clocks | | tgy0 | 54 | Clk Delay, YO to Global GLB Clk Line (Ref. clk) | 1.4 | 1.4 | 1.5 | 1.5 | ns | | tgyl/2 | 55 | Clk Delay, Y1 0r Y2 to Global GLB Clk Line | 1.4 | 1.4 | 1.5 | 1.5 | ns | | tgcp | 56 | Clk Delay, Clock GLB to Global GLB Clk Line | 0.8 | 1.8 | 0.8 | 1.8 | ns | | tioy2/3 | 57 | Clk Delay, Y2 0r Y3 to l/0 Cell Global Clk Line | 0.0 | 0.0 | 0.0 | 0.0 | ns | | tiocp | 58 | Clk Delay, Clk GLB to l/0 Cell Global Clk Line | 0.8 | 1.8 | 0.8 | 1.8 | ns | | Global Reset | | tgr | 59 | Global Reset to GLB and l/0 Registers | | 2.8 | | 4.3 | ns | | | | | | | | |
| Typical oscillating frequency | fosc Typ | 47 | 52 | 57 | kHz | Cr = 3300 pF, Rr = 10 kl | | Maximum oscillating | fosc Max | 500 | | | kHz | | | frequency | | Supply voltage dependency of | fosc l | | +0.5 | +2.0 | % | 12V" VIN " 25V | | oscillating frequency | | Temperature dependency of | CZfosc 2 | | +5.0 | | % | -20IC " Ta " 105IC | | oscillating frequency | | Discharge current of CT | lsin kCT | 7.5 | 8.4 | 9.3 | mA | VCT= 2.0 V | | Low level threshold voltage | VTLCT | | 1.2 | | V | 1 | | | | | | | |
|
