RS1A23LA40，there are the best RS1A23LA40 suppiers all over the world here.These are the list and detailed contact method of RS1A23LA40 suppliers all over the world as follows.You can buy or get informations of RS1A23LA40 through email , message or tel.

suppliers of RS1A23LA40 and PDF data of RS1A23LA40

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

RS1A23LA40 Datasheet

AC-couplef:l video input from a tuner. ZIN > 10kl +15%. This drives an on-chip video amplifier. The other input of this amp is AC grounded by being connected to an internaIVREF. The video amplifier has selectable gain from OdB t0 12.7dB in 63 steps and its output signal can be selected normal or inverted.
RS1A23LA40 Price

	Parameter	Max	Units
VCES	Collector-to-Emitter Voltage	600	V
lc@Tc= 25C	Continuous Collector Current	31	A
lc @ Tc = 1000C	Continuous Collector Current	15
ICM	Pulsed Collector Current	62
ILM	Clamped Inductive Load Current	62
IF@Tc= 25C	Diode Continuous Forward Current	31
IF @ Tc = 1000C	Diode Continuous Forward Current	15
IFM	Diode Maximum Forward Current	64
VGE	Gate-to-Emitter Voltage	±20	V
PD@Tc= 25C	Maximum Power Dissipation	208
PD @ Tc = 1000C	Maximum Power Dissipation	83	W
TJ TSTG	Operating Junction and Storage Temperature Range	-55 to +150	oC
	Soldering Temperature, for 10 sec.	300 (0.063 in. (1.6mm) from case)

RS1A23LA40 on stock

.. Separate digital volume control for left and right channe Soft mute .. Digital bass and treble tone control .. External Digital Sound Processor (DSP) option possible via standard I2S_bus or Japanese digital I/O format .. Selectable clipping prevention .. Selectable Dynamic Bass Boost (DBB) .. On-chip digital de-emphasis.

SYMBOL	PARAMETER	TEST CONDITIONS	MIN	TYP (Notel)	MAX	UNIT
RTOTAL	RH to RL resistance	W option		10		kQ
	RH to RL resistance	U option		50		kQ
	RH to RL resistance tolerance		-20		+20	%
VRH	RH terminal voltage	VRL= OV	O		V+	V
Rw	Wiper resistance	V+ = 12.OV, wiper current = V+/ RTOTAL		70	200	Q
CH/CL/CW (Note 13)	Potentiometer Capacitance			10/10/ 25		pF
ILkgDCP	Leakage on DCP pins	Voltage at pin from GND to V+		0 1	1	UA
VOLTAGE DIVIDER MODE (OV @ RL; V+ @ RH; measured at Rw, unloaded)
INL (Note 6)	Integral non-linearity		1		1	LSB (Note 2)
DNL	Differential non-linearity	W option	-0.75		0.75	LSB
(Note 5)		U option	-0.5		0 5	(Note 2)
ZSerror	Zero-scale error	W option	0	1	7	LSB
(Note 3)		U option	0	0 5	2	(Note 2)
FSerror	Full-scale error	W option	7	1	0	LSB
(Note 4)		U option	2	1	O	(Note 2)
TCV (Note 7, 13)	Ratiometric Temperature Coefficient	DCP register set t0 40 hex		+4		ppm/oC
RESISTOR MODE (Measurements between Rw and RL with RH not connected, or between Rw and RH with RL not connected)
RINL (Note 11)	Integral non-linearity	DCP register set between 20 hex and 5F hex; monotonic over all tap positions	1		1	Ml (Note 8)
RDNL	Differential non-linearity	W option	-0.75		0.75	Ml
(Note 10)		U option	-0.5		0 5	(Note 8)
Roffset (Note 9)	Offset	DCP Register set t0 00 hex, W option	0	1	7	Ml (Note 8)
Roffset (Note 9)		DCP Register set t0 00 hex, U option	0	0 5	2	Ml (Note 8)
TCR (Note 12, 13)	Resistance Temperature Coefficient	DCP register set between 20 hex and 7F hex		+45		ppm/oC

Suppliers Datasheet
		Exact Matc