description	RES 59.0K OHM 1/10W .5% 0805 SMD
Technical/Catalog Information	RR1220P-5902-D-M
Vendor	Susumu Co Ltd
Category	Resistors
RoHS Status	RoHS Compliant
Other Names	RR1220P 5902 D M RR1220P5902DM RR12P59 0KDTR ND RR12P590KDTRND RR12P59.0KDTR
Lead Free Status	Lead Free
Packaging	Tape & Reel (TR)
Tolerance	卤0.5%
Temperature Coefficient	卤25ppm/掳C
Resistance In Ohms	59.0K
Voltage - Working	76.811V
Power (Watts)	0.1W, 1/10W
Lead Style	Surface Mount (SMD - SMT)
Case	0805 (2012 metric)
Composition	Thin Film

RR1220P-5902-D-M，there are the best RR1220P-5902-D-M suppiers all over the world here.These are the list and detailed contact method of RR1220P-5902-D-M suppliers all over the world as follows.You can buy or get informations of RR1220P-5902-D-M through email , message or tel.

suppliers of RR1220P-5902-D-M and PDF data of RR1220P-5902-D-M

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

RR1220P-5902-D-M Datasheet

	-		07nA )OmP		P	ulse
_		41 bntim:A	OOmJ
_			l lQOmA


			IB	=o			O

RR1220P-5902-D-M Price

The standby funcuon is provided by the STBY'control, pin 3. If pin 3 is left open-circuit i the regulator operates normally, and provides a regulated output when a valid supply voltage is applied to Vin (pins 4-6) with respect to GND (pins 7-10). If a low voltage z is then applied to pin 3 the regulator output will be disabled and the input current drawn by the ISR will be reduced to about 15mA 3. The standby control may also be used to hold-off the regulator output during the period that input power is applied.
RR1220P-5902-D-M on stock

	Parameter	Typ.	Max	Units
ROJC	Junction-to-Case		0 74
Rocs	Case-to-Sink, Flat, Greased Surface	0.50		oC/w
ROJA	Junction-to-Ambient~		62
ROJA	Junction-to-Ambient0		40

Built-in thermal shutdown circuit (TSD) 8 Independent voltage sources Corresponds t0 3.3V or 5V DSP 4 selectable mute inputs Spindle Output PWM mode control FG output: open collector type Selectable brake(short & reverse brake) Built-in hall bias

Suppliers Datasheet
		Exact Matc