| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
RR0816P-1022-B-T5-02C Datasheet (1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum (2) All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. RR0816P-1022-B-T5-02C Price Pulsed, Tj = 125IC 0.5 1.4 2.5 0:S Inductive Load Switching Times ton RR0816P-1022-B-T5-02C on stock BYPP2 (pin 29), BYP (pin 31), and BYPM (pin 32) are also reference voltages to be used in the analog circuit. BYP should be connected to the ground with a O.1-~F ceramic capacitor. The capacitor value for BYPP2 and BYPM aects the step response. We consider, for many applications, 200 pF t0 600 pF is the reasonable value. However, it depends on the application environment, and making careful adjustments using the cut-and-try method is recommended. All of BYPP2, BYP, and BYPM should be heavily decoupled with appropriate capacitors. Do not use these voltages anywhere else in the system because it aects the stability of these reference levels, and causes the performance degradation. These are analog output pins, so do not apply the voltage from the outside.
|
