| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
RQ5RW48AA-TR Datasheet Notes: l. Bias: -30V for specified loss +30mA for specified isolation 2.Switching specad is measured from 10%-9096 and 90%-10% of the detected RF with a 2 MHz maximum switching rate. 3. Switching speed is measured with a standard M/A-COM driver. 4. Operatlng power is l00 mW maximum. RQ5RW48AA-TR Price
RQ5RW48AA-TR on stock CL includes probe and jig capacitance. Waveform l is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. All input pulses are supplied by generators having the following characteristics: PRR " 10 MHz, Zo = 50 I , tr " 2.5 ns, tf " 2.5 ns The outputs are measured one at a time, with one transition per measurement. FREQUENCY TEST BIT As shown in Table 2, bit 6 0f the day byte is the frequency test bit. When the frequency test bit is set to logic "1" and the oscillator is running, the LSB of the seconds register will toggle at 512 Hz. When the seconds register is being read, the DQO line will toggle at the 512 Hz frequency as long as conditions for access remain valid (i.e., CE low, OE low, WE high, and address for seconds register remain valid and stable). |
