| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| RPE114902C0G153J100V | MURATA | N/A | 1500 |
|
|
RPE114902C0G153J100V Datasheet Through pin 8 it is possible to programtheduty cycle of the alarm signal waveform (see figure 2). When pin 8is hightheoutputsignalhasa dutycycle of50% ; if pin 8 is low the duty cycle is l : 64.The period of the outputsignalis always 320ms using the compo- nent values indicated in block diagram. RPE114902C0G153J100V Price If there is no need for the control unit to handle external analog signals referred to the power GND, the best approach is to connect the reference potential of the control unit to the device ground (see application circuit in fig. 3), which becomes the common signal GND for the whole control board avoiding shift of Viri, ViI and Vstat. RPE114902C0G153J100V on stock MATCH ROM [55h] The match ROM command followed by a 64-bit ROM code sequence allows the bus master to address a specific slave device on a multi-drop or single-drop bus. Only the slave that exactly matches the 64-bit ROM code sequence will respond to the function command issued by the master; all other slaves on the bus will wait for a reset pulse.
|
