QS7025A-55TF Datasheet| lTYPE | VDSS | RDS(on) | ID | | I STD17NF03L | 30V | <o.osl | 17A | | | | |
QS7025A-55TF Price 1. This speeds up the adaption, but is not necessary for the adaption to work. The ratio can be set to zero if desired. 2. The chip will converge to the correct interpolation ratio outside of the tracking bandwidth, but while it is converging the FIFO will overflow or underflow so that the data output will be corrupted until it re-converges. QS7025A-55TF on stock| Item | Symbol | Condition | mln | typ | max | Unit | | | ICBO | VCB- -10 V, IE -O | | | -1 | | | Collector cutoff current | ICEO | VCE - -18 V, IB -0 | | | -10 | A | | Collector-base voltage | VCHO | Ic = -10 p A, IE =0 | -20 | | | V | | Collector-emitter voltage | VCEO | Ic = -l rriA, IB =0 | -18 | | | V | | Emitter-base voltage | VEBO | IE = -10 p A, lc =0 | -5 | | | V | | | hFEl* | VCE=-2V,lc=-500mA | 90 | | 360 | | | DC current gain | hFEZ | VCE - -2 V, lC - -1.5 A | 50 | | | | | Collector-emitter saturation voltage | VCE(sat> | Ic = -1 A, IB= -50 mA | | | -0.5 | V | | Base-emitter saturation voltage | VBE(,at} | Ic- -500 mA, IH= -50 mA | | | -1.2 | V | | Transition frequency | fT | VCB=-6V,IE=50mA,f=200MHz | | 200 | | MHz | | Collector output capacitance | Cob | VCB= -6 V,IE=O, f=l MHz | | 40 | | pF | | | | | | | |
| | | TC55W1600FT | | | SYMBOL | PARAMETER | -55 | -70 | UNIT | | MIN | MAX | MIN | MAX | | twc | Write Cycle Time | 70 | | 85 | | | | tWP | Write Pulse Width | 50 | | 55 | | | tcw | Chip Enable to End of Write | 60 | | 70 | | | tBW | Data Byte Control to End of Write | 60 | | 70 | | | tAS | Address Setup Time | 0 | | 0 | | | tWR | Write Recovery Time | 0 | | O | | ns | | LODW | R/W Low to Output High-Z | | 25 | | 30 | | 0EW | R/W High to Output Active | 0 | | 0 | | | tDS | Data Setup Time | 30 | | 35 | | | tDH | Data Hold Time | 0 | | 0 | | | | | | | | |
|
