QM20-26PL-CFI，there are the best QM20-26PL-CFI suppiers all over the world here.These are the list and detailed contact method of QM20-26PL-CFI suppliers all over the world as follows.You can buy or get informations of QM20-26PL-CFI through email , message or tel.

suppliers of QM20-26PL-CFI and PDF data of QM20-26PL-CFI

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

QM20-26PL-CFI Datasheet

J l l l

^ - Square^ve A=1 n n o

{

t l

{

QM20-26PL-CFI Price

The Li-Ion battery voltage ranges from approximately 3V and 4.1V-4.2V (depending on the anode material). In case the regulated output voltage is from 2.5V and 3.3V, it can be that, close to the end of the battery life, the battery voltage goes down to the regulated one. In this case the device stops to switch, working at 100% of duty cycle, so minimizing the dropout voltage and the device losses.
QM20-26PL-CFI on stock

llnformation (inoluding circuit diagrams and circuit parameters) herein is for example only; it is not guarant- eed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.

			M34A02
Symbol	Alt	Parameter	Vcc=2.7 t0 3.6V TA = -40 t0 850C		Unit
Symbol	Alt	Parameter	Min	Max	Unit
LCHlCH2	tR	Clock Rise Time		1000	ns
tCLICL2	tF	Clock Fall Time		300	ns
tDHIDH2 2	tR	SDA Rise Time		1000	ns
tDLIDL2 2	tF	SDA Fall Time		300	ns
tCHCL	tHIGH	Clock Pulse Width High	4		US
tCLCH	tLOW	Clock Pulse Width Low	4.7		US
tCHDX1	LSUS1-A	START Set-up Time	4.7		US
tDLCL	LHDS1_A	START Hold Time	4		US
tDXCX	LSUDAT	SDA In Set-up Time	250		ns
tCLDX	LHD:DAT	SDA In Hold Time	0		US
tCHDH	LSUST0	STOP Set-up Time	4		US
tDHDL	tBUF	Time the bus must be free between STOP and next START	4.7		US
tCLQV 3	tAA	Clock Low to SDA Out Valid	400	900	ns
tCLQX	tDH	SDA Out Hold Time after Clock Low	300		ns
fc	fSCL	Clock Frequency	10	1 00	kHz
1w	tWR	Write Time		10	ms

Suppliers Datasheet
		Exact Matc