PBRC8.000BR-A(37 3P)，there are the best PBRC8.000BR-A(37 3P) suppiers all over the world here.These are the list and detailed contact method of PBRC8.000BR-A(37 3P) suppliers all over the world as follows.You can buy or get informations of PBRC8.000BR-A(37 3P) through email , message or tel.

suppliers of PBRC8.000BR-A(37 3P) and PDF data of PBRC8.000BR-A(37 3P)

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

PBRC8.000BR-A(37 3P) Datasheet

A heatsink may be required depending on the maximum power dissipation and maximum ambient temperature of the application. Under all possible operating conditions, the junction temperature must be within the range specified under absolute maximum ratings. To determine if the heatsink is required, the power dissipated by the regulator, PD must be calculated. The below formula shows the voltages and currents for calculating the PD in the regulator: lin = IL / IG PD = (Vin-Vout) * IL + (Vin) * IG Ex. PD = (3.3V-2.5V) * 0.5A + 3.3V ' 11mA = 400mW + 36mW = 436mW Remark: IL iS output load current, IG iS ground current. Vin is input voltage Vout is output voltage
PBRC8.000BR-A(37 3P) Price


	jj
	TYP OVEFl	CAL LOAD -
	TYP OVEFl	CAL LOAD -
	TYP SENSI	CAL TIVITY
1
GUARANTEED* OPERATING WINDOW I I

PBRC8.000BR-A(37 3P) on stock

- LINEAR CURRENT LIMITER CIRCUIT: limits the drain current Id to llim whatever the Input pin voltage. When the current limiter is active, the device operates in the linear region, so power dissipation may exceed the capability of the heatsink. Both case and junction temperatures increase, and if this phase lasts long enough, junction temperature may reach the overtemperature threshold Tjsri.

Suppliers Datasheet
		Exact Matc