PBGA272-V5.4WE Datasheet 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the PBGA272-V5.4WE Price| Parameter | Symbol | Conditions | Min | Typ | Max | Unit | | Input Leakage | IIL | Note l | 1.0 | | 1.0 | UA | | RESET Low Level | VOL | Note 3 | | | 0.4 | V | | Internal Pull-up Resistor | | Note l | | 40 | | kQ | | Operating Current (CMOS) | lccl | | | | 30 | UA | | Input Capacitance | CIN | | | | 5 | pF | | Output Capacitance | COUT | | | | 10 | pF | | PBRST Manual Reset Minimum Low Time | tPB | PBRS=VII | 20 | | | ms | | Reset Active Time | tRST | | 250 | 610 | 1000 | ms | | ST Pulse Width | tST | Note 4 | 20 | | | ns | | Vcc Fail Detect to RESET or RESET | tRPD | | | 5 | 8 | }~IS | | Vcc Slew Rate | tF | 4.75V t0 4.25V | 300 | | | l-IS | | PBRST Stable LOW to RESET and RESET Active | tPDLY | | | | 20 | ms | | Vcc Detect to RESET or RESET inactive | tRPU | tRISE= 5ps | 250 | 610 | 1000 | ms | | Vcc Slew Rate | tR | 4.25V t0 4.75V | 0 | | | ns | | | | | | | | PBGA272-V5.4WE on stock| | IKICH[S | MILLI | [TERS | | | MIN | 1ll× | MIKI | MA× | | _ | 0.053 | 0,069 | 1,35 | 1.75 | | _1 | 0.004 | 0 01 0 | 0 10 | 0.25 | | B | 0.014 | 0 01 9 | 0 35 | 0.49 | | C | 0.007 | 0 01 0 | 0 19 | 0.25 | | e | 0.050 | 1,27 | | E | 0.150 | 0,157 | 3.80 | 4.00 | | H | 0.228 | 0.244 | 5 80 | 6.20 | | h | 0.010 | 0,020 | 0,25 | 0.50 | | L | 0.016 | 0 050 | 0 4 0 | 1_27 | | | | | | |