PBA100F-48 Datasheet| Part NO. | Max Freq. | Max Data Rate | Interface | Package | | K4D261638E-TC2A | 350MHz | 700Mbps/pin | | | | K4D261638E-TC33 | 300MHz | 600Mbps/pin | | K4D261638E-TC36 | 275MHz | 550Mbps/pin | SSTL 2 | 66pin TSOP-II | | K4D261638E-TC40 | 250MHz | 500Mbps/pin | | K4D261638E-TC50 | 200MHz | 400Mbps/pin | | | | | |
PBA100F-48 Price| DC Current Gain ( lc= 2.0 A, VCE= 1.0 V ) D44H1,4,7,10 /D45H1,4,7,10 D44F-12,5,8,11 /D45H2,5,8,11 ( lc= 4.0 A, VCE= 1.0 V ) D44H1,4,7,10 /D45H1,4,7,10 D44H2,5,8,11 /D45H2,5,8,11 | hFE | 35 60 20 40 | | | | ICollector-Emitter Saturaton Voltage [ '( lc- 8.0 A, lB= 800 mA ) D44H1,4,7,10 tD45H1,4,7,10 l ( lc= 8.0 A, la= 400 mA ) D44H;!,5,8,11 /D45H2,5,8,11 | VCE(sat) | | 1.0 1o | V | | jIBase-Emitter Saturation Voltage l'( lc= 8.0 A, ls= 800mA ) ALL Devices | VB(sat) | | 1.5 | V | | | | | |
PBA100F-48 on stock DiSEq C Encoding The internal oscillator is factory-trimmed to provide a tone of 22kHz in accordance with DISeqC standards. No further adjustment is required. The 22kHz oscillator can be controlled either by the I2C interface (ENT bit) or by a dedicated pin (DSQIN) that allows immediate DiSEqC data encoding for the LNB. All the functions of this IC are controlled via the I2C bus by writing to the system registers (SR). The same registers can be read back, and two bits will report the diagnostic status. The internal oscillator operates the converters at ten times the tone frequency. The device offers full I2C compatible functionality, 3.3V or 5V, and up to 400kHz operation. | Parameter | Symbol | Conditions | Min | Typ | Max | Unit | | Collector-emitter voltage (Base open) | VCEO | Ic = -10 rriA. IB = 0 | -80 | | | V | | Collector-base cutoff current (Emitter open) | ICBO | VCB = -100 V, IE = 0 | | | -10 | yA | | Emitter-base cutoff current (Collector open) | IEBO | VEB = -5 V,IC = 0 | | | -50 | yA | | Forward current transfer ratio | hFEl | VCE = -2 V,IC = - O.l A | 45 | | | | | hFE2 4 | VCE = -2 V,IC = -1 A | 90 | | 260 | | Collector-emitter saturation voltage | VCE(,zu) | Ic = -3 A, IB = - 0.15 A | | | - 0.5 | V | | Base-emitter saturation voltage | VBE(szU) | IC = -3 A, IB = - 0.15 A | | | -1.5 | V | | Transition frequency | fT | VCE = -10 V, IC = - 0.5 A, f = 10 MHz | | 30 | | MHz | | rurn-on time | tn | IC = -1 A, IBl = - 0.1 A, IB2 = 0.1 A | | 0 15 | | !1s | | Storage time | ts | VcC = -50 V | | 0 8 | | !1s | | Fall time | tr | | 0 15 | | lls | | | | | | | |
|
