Figure 15 shows typical connections for high performance dc biasing using the AD C's internal voltage reference. All compo- nents may be powered from a single +5 V supply (in the example analog input signals are referenced to ground).
O The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments. medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk.
| Rating | Value | Units |
| Power Supply and All InpuVOutput Pins | -0.3 to +4.0 | v |
| Non-Operating Case Temperature | -50 to +100 | oc |
| Soldering Temperature (10 seconds) | 250 | oc |
| | |
| ltem | Symbol | Test Condition | Min | Max | Unit |
| Input capacitance | CIN | VIN=OV | | 8 | pF |
| Input/Output capacitance | Cio | Vio=OV | | 10 | pF |
| | | | | |
