NJG1553F-L3，there are the best NJG1553F-L3 suppiers all over the world here.These are the list and detailed contact method of NJG1553F-L3 suppliers all over the world as follows.You can buy or get informations of NJG1553F-L3 through email , message or tel.

suppliers of NJG1553F-L3 and PDF data of NJG1553F-L3

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

NJG1553F-L3 Datasheet

	Chip
PART NO.	Material	Emitted Color
ELD-425EWA	GaAsP/GaP	Orange

NJG1553F-L3 Price

DIMENSIONS
	INCHES		MM
DIMN	MIN	MAX	MIN	MAX
A	0.110	0.120	2.80	3.04
B	0.047	0.055	1.20	1.40
C	0.083	0.104	2.10	2.64
D	0.035	0.040	0.89	1.03
E	0.070	0.080	1.78	2.05
F	0.018	0.024	0.45	0.60
G	0.015	0.020	0.37	0.51
H	0.0005	0.004	0.013	0.10
J	0.034	0.040	0.887	1.02
K	0.003	0.007	0.085	0.18
L		0.027		0.69

NJG1553F-L3 on stock

If the Read/Reset command is issued during a Chip Erase operation the memory will take about 10ps to abort the Chip Erase. During the abort pe- riod no valid data can be read from the memory. Issuing a Read/Reset command during a Chip Erase operation willleave invalid data in the mem- ory.

The device may be mounted up to the seating plane, but the temperature of the plastic body must not exceed the specified maximum storage temperature (Tstg max) If the printed-circuit board has been pre-heated, forced cooling may be necessary Immediately after soldering to keep the temperature within the permissible limit.

Suppliers Datasheet
		Exact Matc