N3216Z800T01(80R)，there are the best N3216Z800T01(80R) suppiers all over the world here.These are the list and detailed contact method of N3216Z800T01(80R) suppliers all over the world as follows.You can buy or get informations of N3216Z800T01(80R) through email , message or tel.

suppliers of N3216Z800T01(80R) and PDF data of N3216Z800T01(80R)

Part Numbert	Mfg	Packt	D/C	Descriptiont	Qty	Company/Contact
N3216Z800T01(80R)	TOKIN		01+		10000	All Element Technology Co.,Ltd Contact:lisa Tel:86-755-82565926 Fax:86-755-82565338 Email: lisa@allelement.net
N3216Z800T01(80R)	TOKIN	1206	01+	stock	10000	BOSHILIELECTRONICSCO.,LTD Contact:Mr.HENSONSU Tel:86-0755-82517055 Fax:86-0755-82517155 Email: BOSHILI232@163.COM

N3216Z800T01(80R) Datasheet

BLOCK O WRITE PROTECTION BITS The PCA24S08 provides a mechanism to divide block o into eight 128-bit (16 byte) pages that can be individually protected against writes. These eight write protection (WPN) bits are stored within a byte of the access protection page and are organized such that the LSB protects the first 128 bits and so on. If a bit in this byte is set to a one and the PBo field is set t0 11, then writes are permitted on the page corresponding to the WPN bit. If the WPN bit is set to a o or the PBo is any value other than 11, then writes are not permitted in that page.
N3216Z800T01(80R) Price

Pin	Pin Name	Description
1	EN1	Active high enable pin for device l. Connect to VINl if not being used.
2	GND	Ground pin. Can be used for heatsinking if needed. Electrically connected to pin 7.
3	SET1	Connecting this pin to ground results in the internally preset value for VOUTl. Connecting to an external resistor divider changes VOUTl to: VOUTl =1.250 1+ R1 R2
4	OUT2	Regulator output for device 2, sourcing up t0 150mA
5	IN2	Supply input pin for device 2.
6	EN2	Active high enable pin for device 2. Connect to VIN2 if not being used.
7	GND	Ground pin. Can be used for heatsinking if needed. Electrically connected to pin 2.
8	SET2	Connecting this pin to ground results in the internally preset value for VOUT2. Connecting to an external resistor divider changes VOUT2 to: VOUT2 =1.250 1+ R1 R2
9	OUT1	Regulator output for device l, sourcing up t0 150mA
1 0	IN1	Supply input pin for device l.

N3216Z800T01(80R) on stock

VDRM/VRRM
Type Volts	Code
CR5AS 400	8
600	-12

I Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.

Suppliers Datasheet
		Exact Matc