| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
N28F001BXT15 Datasheet GENERAL DESCRIPTION The SSM2275 and SSM2475 use the Butler Amplifier front end, which combines both bipolar and FET transistors to offer the accuracy and low noise performance of bipolar transistors and the slew rates and sound quality of FETs. This product family includes dual and quad rail-to-rail output audio amplifi- ers that achieve lower production costs than the industry stan- dard OP275 (the first Butler Amplifier offered by Analog Devices). This lower cost amplifier also offers operation from a single 5 V supply, in addition to conventional+15 V supplies. The ac performance meets the needs of the most demanding au- dio applications, with 8 MHz bandwidth, 12 V/ccS slew rate and extremely low distortion. N28F001BXT15 Price 3.579545 MHz A-cut crystal (NTSC TV color-burst) is need- ed between pins 6 and 7. Load capacitors and a feedback resistor are included on-chip for good start-up and stability. The oscillator is stopped when the TONE ENABLE input is pulled to logic low. TONE ENABLE Input (Pin 2): This input has an internal pull-up resistor. When TONE ENABLE is pulled to logic low, the oscillator is inhibited and the tone generators and output transistor are turned off. A low to high transition on TONE ENABLE latches in data from DO-D3. The oscillator starts, and tone generation continues until TONE ENABLE is pulled low again.
|
