N1030B，there are the best N1030B suppiers all over the world here.These are the list and detailed contact method of N1030B suppliers all over the world as follows.You can buy or get informations of N1030B through email , message or tel.

suppliers of N1030B and PDF data of N1030B

Part Numbert	Mfg	Packt	D/C	Descriptiont	Qty	Company/Contact
N1030B	APM HEXSEAL		08+	Stock on hand	30000	Meicheng Tech (HK) Electron Li.. Contact:Yoyo Tel:86-755-83740517 Fax:86-755-83741004 Email: sales@meicheng-hk.com

N1030B Datasheet

		OUTPUT ON TA = 150IC
		TA = +25TC-"-" TA = -40YC ----



j	l

N1030B Price

			Value
Symbol	Test Conditions		Min	Typ.	Max	Unit
VF13	IF =8A	RB008-40M/G			1.5	V
	IF =8A	RB008-40T			1.7	V
	IF = 8A@ Tamb = 25IC				1.45	V
VF13	IF =4A	RB008-40M/G			1.3	V
	IF =4A	RB008-40T			1.35	V
	IF = 4A@ Tamb = 25IC				1.2	V
VF13	IF=1A				1.1	V
	IF = 1A@ Tamb = 25IC				1.0	V
	IF=1A@Tj=85IC				0.9	V

N1030B on stock

After each 24-hour period has elapsed, the battery is connected to an internal lMQ test resistor for one second. During this one second, if battery voltage falls below the battery voltage trip point (2.6V), the battery warning output BW iS asserted. Once asserted, BW remains active until the module is replaced. The battery is still retested after each Vcc power-up, however, even if BW iS active. If the battery voltage is found to be higher than 2.6V during such testing, BW iS de-asserted and regular 24-hour testing resumes. BW has an open drain output driver.

- Over-temperature warning - Battery monitoring to detect battery interrupt or a chattering battery contact to store data before microcontroller power down (e.g. to store seat position) - Signalling of potential RAM-retention errors due to low microcontroller Vcc.

Suppliers Datasheet
		Exact Matc