| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| MSM83C154S-F79GS-2K | OKI | QFP | 97+ | 750 |
|
||
| MSM83C154S-F79GS-2K | OKI | QFP | 97+ | 750 |
|
||
| MSM83C154S-F79GS-2K | QUALCOMM | 97+ | 1650 |
|
MSM83C154S-F79GS-2K Datasheet
MSM83C154S-F79GS-2K Price The RHRD440CC, RHRD460CC, RHRD440CCS and RHRD460CCS are hyperfast dual diodes with soft recovery characteristics (trr < 30ns). They have half the recovery time of ultrafast diodes and are silicon nitride passivated ion- implanted epitaxial planar construction. - Write a value to the control register that has all the control bits set to the desired state. This can be rep- resented as Oxys tOlr in binary, where xy are the WD bits, and rst are the BP bits. (Operation pre- ceeded by a start and ended with a stop). Since this is a nonvolatile write cycle it will take up t0 10ms to complete. The RWEL bit is reset by this cycle and the sequence must be repeated to change the non- volatile bits again. If bit 2 is set to '1' in this third step (Oxys tllr) then the RWEL bit is set, but the WDl, WDO, BP2, BPl and BPO bits remain unchanged. Writing a second byte to the control register is not allowed. Doing so aborts the write operation and returns a NACK. 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use ofthe information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk ofbodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail- safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation ofthe Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part ofthis document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. |
