| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
GS8182Q18AD-200 Datasheet
GS8182Q18AD-200 Price The LTC1731 is a linear battery charger controller. The charge current is programmed by the combination of a program resistor (RPROG) from the PROG pin to ground and a sense resistor (RSENSE) between the Vcc and SENSE pins. RPROG,siets a program current through an internal trimmed 800 I resistor setting up a voltage dropfrom Vcc to the input of the current amplifier (CA). The current amplifierservosthe gate ofthe external P-channel MOSFET to force the same voltage drop across RSENSE which sets the charge current. When the potential at the BAT pin approaches the preset float voltage, the voltage amplifier (VA) will start sinking current which reduces the voltage drop across RSENSE, thus reducing the charge current. GS8182Q18AD-200 on stock
Allowable Solder Time IR and vapor phase-up t0 30 seconds with 260 Wave-up t0 6 seconds at 2600C Vibration Per MIL-STD-202F, method 204D, condition B (.06" or 15 G's between 10 HZ t0 2 KHz) with no contact inconsistencies greater than 1 microsecond. Shock Per MIL-STD-202F, method 213B, condition A (50 G's) with no contact inconsistencies great than l microsecond. Sealing Bottom seal standard Top tape seal optional Marking Special marking available-consult CTS |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
