ADMap-561  > EEGA2A822FCE

suppliers of EEGA2A822FCE and PDF data of EEGA2A822FCE

Part Numbert Mfg Packt D/C Descriptiont Qty Company/Contact  
EEGA2A822FCE PANASONIC  DIP  07+    45000 


EEGA2A822FCE PANASONIC    07+     
    Shenzhen Haixinyuan Electronic..
  • Contact:Zhu
  • Tel:86-755-83013532
  • Fax:0755-83013883
  • Email: sales@hxydz.com
EEGA2A822FCE PANASONIC    07+    DIP 

EEGA2A822FCE Datasheet
In an overload condition, the Si9750 will go into a relaxation mode current limit operation that not only protects the source and load, but also reduces the power dissipated in the MOSFET. When an overload is detected, the circuit quickly turns off, then goes into a retry mode whereby the current is ramped up slowly. If the fault still exists, the current will ramp down again. This sequence will repeat indefinitely at a period defined by 106 X CRETRY until the fault is removed. Typically, capacitors in the range of l nF t0 1 ccF can be used on CRETRY, but the period should be >50 ms.
EEGA2A822FCE Price
The L78SOO series of three-terminal positive regu- lators is available in T0-220 and T0-3 packages and with several fixed output voltages, making it useful in a wide range of applications. These regu- lators can provide local on-card regulation, eliminat- ing the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shut-down and safe area protec- tion, making it essentially indesh uctible. Ifadequate heat sinking is provided, they can deliver over 2A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents.
EEGA2A822FCE on stock

SYMBOL PARAMETER CONDITIONS VALUE UNIT
RthO_a) thermal resistance from junction to ambient all diodes loaded 370 K/W
RtriO_sp) thermal resistance from junction to solder point one diode loaded; note 1 135 K/W
all diodes loaded; note 1 125 K/W


Symbol Conditions 2SC5370 Unit
ICB VCB=60V 10max
IEB VEB=7V 10max
V(BR)CE lc=25mA 40min v
hFE VCE=2V, lc=6A 70min*
VCE(sat) lc=6A, IB=0.3A 0.3max v
VBE(sat) lc=6A, IB=0.3A 1.2max v
fT VCE=12V, IE=-3A 90typ MHz
COB VCB=10V, f=lMHz 120typ pF