| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| EEA-RNVNB10662 | TO | AMP | 0016+ |
|
|||
| EEA-RNVNB10662 | AMP | TO | 0016+ | 300 |
|
|
EEA-RNVNB10662 Datasheet The SHM-7 is a complete sample-hold, containing an input buffer amplifier, a precision 53 pF MOS holding capacitor, and two output buffer amplifiers. The sampling switch is controlled by a series 10,000 complementary ECL input. An ECL differential line driver can be conveniently used for the EEA-RNVNB10662 Price ~rovides snap-in connection between SIP Stiks and motherboard ~Low insertion force, redundant contacts Contact manufacturer directly for more detailed specifications: -AMP Inc. 1-800-522-6752, +1-717-986-7777 -Molex Inc. 1-800-786-6539, +1-630-969-4747 EEA-RNVNB10662 on stock VCCl and VCC2 provide supply voltage to the first and second stage, as well as provides some frequency selectivity to tune to the operating band. Essentially, the bias is fed to this pin through a short microstrip. A bypass capacitor sets the inductance seen by the part, so placement of the bypass cap can affect the fre- quency of the gain peak. This supply should be bypassed individually with 100pF capacitors before being combined with Vcc for the output stage to pre- vent feedback and oscillations. Note: (1) This parameter is tested initially and after a design or process change that affects the parameter. (2) The minimum DC input voltage is -0.5V. During transitions, inputs may undershoot to -2.OV for periods of less than 20 ns. Maximum DC voltage on output pins is Vcc +0.5V, which may overshoot to Vcc +2.OV for periods of less than 20 ns. (3) Output shorted for no more than one second. No more than one output shorted at a time. (4) Latch-up protection is provided for stresses up t0 100 mA on address and data pins from -1V to Vcc +1V. |
